Licensed & insured pool builders across New South Wales
Glass pool safety fence beside a pool

Pool Fencing & Safety Barriers in Turners Flat, NSW

Glass and aluminium pool fences engineered for New England & North West conditions and certified for the NSW Swimming Pools Register.

In Turners Flat, Pool Fencing & Safety Barriers is the supply and installation of a compliant fence or barrier separating the pool from the house and street. The work follows the Swimming Pools Act 1992 and AS 1926.1, then is inspected by a certifier.

Pool fencing in Turners Flat sits at the intersection of design and child safety law, and getting it right protects both your family and the legality of the pool. The controlling document across New South Wales is AS 1926.1. It requires a barrier at least 1200mm high measured on the outside, a gap under the fence of no more than 100mm, and gaps between vertical members held to 100mm so a small child cannot squeeze through. Gates draw the most scrutiny: they must open away from the pool, latch automatically from any position, and never be propped. A 900mm non-climbable zone has to be preserved, which means keeping pot plants, pumps, barbecues and climbable rails well clear of the inside face. We install three main barrier types across Coffs Harbour properties. Frameless glass gives an almost invisible edge, semi-frameless glass uses slim posts to cut the cost, and powder-coated tubular aluminium offers durability and value on larger or windier New England & North West sites. Glass panels are toughened safety glass and fixed on engineered spigots; aluminium panels bolt to posts set in concrete footings sized for the ground conditions. The Pool Fencing & Safety Barriers also covers boundary fences that double as pool barriers, which carry their own height and gap rules, and existing fences that no longer comply because the standard has tightened over the years. After installation the Pool Fencing & Safety Barriers concludes with the compliance inspection and the certificate required to register the pool on the NSW Swimming Pools Register. The result around your Turners Flat pool is a barrier that suits the home, holds up to weather and traffic, and gives you a documented, inspected guarantee that the pool meets the standard.

Pool Fencing & Safety Barriers Questions for Turners Flat

What are the pool fence rules in New South Wales?
Under AS 1926.1 the barrier must be at least 1200mm high, with no more than a 100mm gap at the bottom and no vertical gaps wider than 100mm. The gate must be self-closing and self-latching, and a 900mm non-climbable zone must be kept clear so a child cannot use objects as a foothold. The Swimming Pools Act 1992 applies to any pool that can hold 300mm of water.
Which pool fence material suits a Turners Flat home?
Glass gives a clean, open look and lets you watch the pool from the house, while aluminium is a practical, lower-maintenance choice with a more traditional appearance. Salt air and sun affect finishes differently, so coating quality matters. Either option must be installed to the standard for the certifier to pass it.
Does a pool fence need approval or inspection?
A pool barrier is inspected as part of a pool's compliance, and a certifier or Coffs Harbour council inspector checks it against the standard. New pools need an approved barrier before they are filled. Existing pools in Turners Flat are also registered and can be inspected, and a certificate of compliance is needed when a property is sold or leased.
Can an existing Turners Flat boundary fence double as a pool fence?
In some layouts, yes. A boundary fence used as part of the pool barrier must be at least 1.8 metres high measured on the pool side, with a clear non-climbable zone at the top on the pool side. Openings such as doors or windows in a house wall generally disqualify it as a barrier. A certifier can confirm how the existing boundary and structures can be used.

Other Pool Services in Turners Flat

← Back to Turners Flat pool builders